2014年01月

もう既にMicrosoftのMB5-857認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはPass4TestのMB5-857問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、MB5-857認定試験に合格することができます。

現在でMicrosoftのMB5-857試験を受かることができます。Pass4TestにMicrosoftのMB5-857試験のフルバージョンがありますから、最新のMicrosoftのMB5-857のトレーニング資料をあちこち探す必要がないです。Pass4Testを利用したら、あなたはもう最も良いMicrosoftのMB5-857のトレーニング資料を見つけたのです。弊社の質問と解答を安心にご利用ください。あなたはきっとMicrosoftのMB5-857試験に合格できますから。

もうこれ以上尻込みしないでくださいよ。MB5-857問題集の詳しい内容を知りたいなら、はやくPass4Testのサイトをクリックして取得してください。あなたは問題集の一部を無料でダウンロードすることができますから。MB5-857問題集を購入する前に、Pass4Testに行ってより多くの情報を読んでください。このサイトを深く知ったほうがいいですよ。それに、試験に失敗すれば全額返金のポリシーについて、事前に調べたほうがいいです。Pass4Testは間違いなくあなたの利益を全面的に保護し、あなたの悩みを思いやるウェブサイトです。

Pass4TestのMicrosoftのMB5-857試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。Pass4Testの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。

試験番号:MB5-857問題集
試験科目:Microsoft 「C5 2010 Project」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2013-12-08
問題と解答:全55問

MB5-857認定試験はずっと人気があるのです。最近IT試験を受けて認証資格を取ることは一層重要になりました。たとえばMicrosoft、IBM、Cisco、VMware、SAPなどのいろいろな試験は今では全部非常に重要な試験です。より多くの人々は複数の資格を取得するために多くのMB5-857試験を受験したいと思っています。もちろん、このようにすればあなたがすごい技能を身につけていることが証明されることができます。しかし、仕事しながら試験の準備をすることはもともと大変で、複数の試験を受験すれば非常に多くの時間が必要です。いまこのようなことで悩んいるのでしょうか。それは問題ではないですよ。Pass4Testあなたを時間を節約させことができますから。Pass4TestのさまざまなIT試験の問題集はあなたを受験したい任意の試験に合格させることができます。MB5-857認定試験などの様々な認定試験で、受験したいなら躊躇わずに申し込んでください。心配する必要はないです。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/MB5-857.html

NO.1 You have posted 75 percent of a project to operation using Project/Periodic/P/L acc.Project.
You want to post more to operation.What is the minimum you need to post?
A.25 percent
B.75 percent
C.76 percent
D.100 percent
Answer: C

Microsoft認定試験   MB5-857問題集   MB5-857参考書   MB5-857認証試験   MB5-857

NO.2 Which of the following statements describes how revised budgets can be updated?
Choose the 2 that apply.
A.By entering the revised amount in the "Revised budget" field
B.By entering a percentage in the "Cost2%" field
C.A parameter determines how a revised budget must be updated
D.A revised budget must be updated manually
Answer: BD

Microsoft認証試験   MB5-857   MB5-857   MB5-857過去問

NO.3 How do you delete projects and project lines when projects are fully delivered and invoiced?
A.By Project/Setup/Reset project
B.By Project/Table/Project and command ALT+F9
C.By Project/Periodic/Jobs/Cleanup
D.By Project/Periodic/Cleanup/Delete project
Answer: D

Microsoft   MB5-857   MB5-857   MB5-857

NO.4 Which of the following statements describes invoicing in the Project module?
A."On account+P/L post+normal" will change the phase to "Active".
B.When you choose "Closing invoice", the module text on the invoice will be "Closing invoice".
C.Closing invoice will only invoice "On account" project lines.
D."Closing invoice" will change the phase to "Finished".
Answer: B

Microsoft   MB5-857   MB5-857   MB5-857   MB5-857認定試験   MB5-857参考書

NO.5 If you use the invoicing principle, when must you post the project 100%?
A.End of the calendar year
B.End of each accounting year
C.When the project is fully invoiced
D.End of the year in which the project has started
Answer: C

Microsoft   MB5-857   MB5-857認定証   MB5-857

NO.6 Which of the following statements describes copying project entries to project lines?
A.Only entries with item numbers can be copied
B.Only entries regarding on-account invoices can be copied
C.Only entries that have not been copied before can be copied
D.Only entries with a cost type connected to a cost type group can be copied
Answer: D

Microsoft認証試験   MB5-857   MB5-857認定証   MB5-857参考書   MB5-857参考書   MB5-857参考書

NO.7 Which of the following statements describes the Project table?
A.It is possible to handle on-account invoicing.
B.It is possible to create a credit note as a copy of an invoice.
C.It is not possible to manage multiple invoicing.
D.It is not possible to create quotations.
Answer: A

Microsoft認定試験   MB5-857   MB5-857問題集   MB5-857

NO.8 What is the effect if you select "Delivery" in the locked field in the vendor table?
A. You cannot send any requisition to the vendor
B. You cannot post any deliveries or invoices from the vendor
C. Nothing happens. The field is for internal information only
D. You cannot send any inquiry to the vendor
Answer: B

Microsoft   MB5-857認定試験   MB5-857   MB5-857練習問題   MB5-857参考書   MB5-857

NO.9 How can project budgets be updated automatically?
Choose the 2 that apply.
A.By Project/Periodic/Update cost budget
B.When changing phase from Created to Quotation
C.By "Update cost budget" button in project lines
D.When changing phase from Quotation to Active
Answer: CD

Microsoft認定資格   MB5-857参考書   MB5-857練習問題

NO.10 Which of following statements describes the copying of project entries to project lines?
A.When you use method lines, you can select delivery date or posting date as the project line date.
B.When you use method lines, posting date will be used as the project line date.
C.When you use method lines, delivery date will be used as the project line date.
D.When you use method lines, Today will be used as the project line date.
Answer: A

Microsoft   MB5-857   MB5-857練習問題   MB5-857認証試験   MB5-857認定証   MB5-857

Pass4Testは最新の000-657試験問題集と高品質のJN0-360認定試験の問題と回答を提供します。Pass4Testの000-350 VCEテストエンジンとHP2-B101試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-540トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/MB5-857.html

君はまだMicrosoft 70-545-Csharp認証試験を通じての大きい難度が悩んでいますか? 君はまだMicrosoft 70-545-Csharp認証試験に合格するために寝食を忘れて頑張って復習しますか? 早くてMicrosoft 70-545-Csharp認証試験を通りたいですか?Pass4Testを選択しましょう!Pass4TestはきみのIT夢に向かって力になりますよ。

IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにMicrosoftの70-545-Csharp認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。Pass4TestのMicrosoftの70-545-Csharp試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。

試験番号:70-545-Csharp問題集
試験科目:Microsoft 「TS:Microsoft Visio 2007, Application Development」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2014-01-28
問題と解答:全54問

Pass4TestのMicrosoftの70-545-Csharp試験トレーニング資料は最高のトレーニング資料です。あなたはIT職員としたら、Pass4Testはあなたが選ばなくてはならないトレーニング資料です。Pass4TestのMicrosoftの70-545-Csharp試験トレーニング資料は絶対に信頼できるもので、IT認証を受ける受験生を対象として特別に研究された問題と解答に含まれているう資料です。 Microsoftの70-545-Csharp試験に受かるのはIT職員の皆さんの目標です。Pass4Testの合格率は信じられないほど高いです。Pass4Testはあなたの成功にずっと力を尽くしています。

Pass4Testのシニア専門家チームはMicrosoftの70-545-Csharp試験に対してトレーニング教材を研究できました。Pass4Testが提供した教材を勉強ツルとしてMicrosoftの70-545-Csharp認定試験に合格するのはとても簡単です。Pass4Testも君の100%合格率を保証いたします。

IT業界で仕事している皆さんはIT認定試験の資格の重要性をよく知っていているでしょう。IT認定試験には多くの種類があります。現在最も人気がある試験もいろいろあります。例えば70-545-Csharp認定試験などです。その中の試験、どちらを受験しましたか。もし一つの認証資格を持っていないなら、IT認定試験を申し込んで試験の資格を取得する必要があります。試験を受ける予定があれば、急いでPass4Testへ来て必要な情報を見つけましょう。Pass4Testはあなたが70-545-Csharp認定試験に合格する保障ですから。

それぞれのIT認証試験を受ける受験生の身近な利益が保障できるために、Pass4Testは受験生のために特別に作成されたMicrosoftの70-545-Csharp試験トレーニング資料を提供します。この資料はPass4TestのIT専門家たちに特別に研究されたものです。彼らの成果はあなたが試験に合格することを助けるだけでなく、あなたにもっと美しい明日を与えることもできます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/70-545-Csharp.html

NO.1 You need to create an organization chart of employees by using a comma-separated values (CSV) file
and the Organization Chart Wizard. Which two columns must the CSV file contain? (Each correct
answer presents part of the solution. Choose two.)
A. A column that uniquely identifies each employee
B. A column that identifies each employees job title
C. A column that contains each employees department
D. A column that identifies who each employee reports to
Answer: AD

Microsoft認定証   70-545-Csharp   70-545-Csharp   70-545-Csharp   70-545-Csharp過去問

NO.2 You have a drawing that contains custom shape data. You need to export the shape data to a new
Microsoft Office Excel 2007 workbook. What should you do?
A. Use the Database Wizard.
B. Use the Reports command.
C. Use the Export to Database command.
D. Save the file as an XML drawing.
Answer: B

Microsoft   70-545-Csharp   70-545-Csharp過去問   70-545-Csharp問題集

NO.3 An External Data recordset named Computer Inventory contains a column named MachineSN. You
create a new Office Visio 2007 diagram and load the Computers and Monitors stencil. A shape named PC
Master from the Computers and Monitors stencil has a Shape Data row labeled Serial Number. To add
a shape to the Visio 2007 diagram, you select the PC Master shape, and then drag and drop a row from
the External Data window to the Visio 2007 page. You notice that the new shapes Serial Number row is
empty. You need the values from the MachineSN column to be entered automatically into the row
labeled Serial Number when you add the shape. What should you do?
A. Change the name of the External Data recordsets column from MachineSN to Serial Number.
B. Change the name of the External Data recordset from Computer Inventory to Serial Number.
C. Modify the PC Master shape on the document stencil. Change the row name of the shape data row
from Serial Number to MachineSN.
D. Copy the PC Master shape to the document stencil. Change the label of the shape data row from
Serial Number to _visDM_MachineSN.
Answer: A

Microsoft   70-545-Csharp認定証   70-545-Csharp認定試験

NO.4 You have an ODBC database that contains information that you want to display in Office Visio 2007.
You need to update the database records by modifying shape data from Visio 2007. What are three
possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. In Visio, use the Link Data to Shapes command from the Data menu.
B. In Visio, point to Visio Extras, start the Database Wizard, and then click Link shapes to database
records.
C. In Visio, click Import Data on the Plan menu.
D. In Visio, point to Visio Extras and click Link to ODBC Database.
E. Create custom code functions to read data from the data source, update the Shape Data rows, and
then write the data to the data source.
Answer: BDE

Microsoft認証試験   70-545-Csharp認定資格   70-545-Csharp認定試験

NO.5 You need to create two PivotDiagrams in Office Visio 2007 by using the minimum number of Visio
documents and pages. What should you do?
A. Create two new Visio documents by using the PivotDiagram template.
B. Create a new Visio document by using the PivotDiagram template. Insert a PivotDiagram into the
existing page.
C. Create a new Visio document by using the PivotDiagram template. Insert a new page, and then insert
the PivotDiagram into the new page.
D. Create two new Visio documents by using the PivotDiagram template. Copy the PivotDiagram from
one document to a blank page in the other document.
Answer: B

Microsoft   70-545-Csharp過去問   70-545-Csharp   70-545-Csharp認証試験   70-545-Csharp   70-545-Csharp認定証

NO.6 You create a shape that has two Shape Data rows named Department and CostCode. Both the
Department and the CostCode rows have the Type =1.
The Department row Format cell has the formula =A;B.
You need to modify the ShapeSheet to meet the following requirements:
When a user selects Department A, only CostCodes A1 and A2 are visible.
When a user selects Department B, only CostCodes B1 and B2 are visible.
What should you do?
A. Insert a new user-defined cell and enter the formula =SETF(GetRef(Prop.CostCode.Format), =
INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|"))
B. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2")
C. Enter the following formula in the Format cell of the CostCode Shape Data row.
=""""&INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")&""""
D. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")
Answer: D

Microsoft認定試験   70-545-Csharp過去問   70-545-Csharp認定証

NO.7 You plan to create a timeline diagram by using Microsoft Office Project 2007. You need to ensure
that the Project data can be imported into Office Visio 2007 by using the Import Timeline Wizard. What
should you do?
A. In Project, save the data as a Microsoft Project File (*.mpp).
B. In Project, save the data as a Microsoft Project Database (*.mpd).
C. In Project, save the data as a Microsoft Project Workspace (*.mpw).
D. In Project, save the data as a Microsoft Project Exchange (*.mpx).
Answer: A

Microsoft   70-545-Csharp参考書   70-545-Csharp認証試験   70-545-Csharp認証試験

NO.8 You need to link a master shape to an ODBC database. The master shape must display the Update
Database Record command when you right-click the shape. What should you do?
A. In Office Visio 2007, run the Database Wizard.
B. From Control Panel, add a new ODBC data source.
C. In Office Visio 2007, run the Database Export Wizard.
D. In Office Visio 2007, run the Export to Database command.
Answer: A

Microsoft認定資格   70-545-Csharp認定資格   70-545-Csharp過去問   70-545-Csharp認定資格

NO.9 You receive an XML data file and a separate XML schema file. The XML schema file describes the XML
data. You need to load the XML data file into the External Data window. Which two actions should
you perform? (Each correct answer presents part of the solution. Choose two.)
A. Transform the XML data file into the classic ActiveX Data Objects (ADO) RowsetSchema format.
B. Verify that the XML data file is well-formed and uses the namespace
http://schemas.microsoft.com/visio/2006/extension.
C. In a code module, use the DataRecordsets object Add method in the Office Visio 2007 document.
D. In a code module, use the DataRecordsets object AddFromXML method in the Office Visio 2007
document.
Answer: AD

Microsoft認定資格   70-545-Csharp   70-545-Csharp   70-545-Csharp過去問   70-545-Csharp   70-545-Csharp認定証

NO.10 You have a shape that contains a Shape Data row named Grade, where Type=0. You need to modify
the Grade row so that it is visible and read-only within the Shape Data window and the Shape Data dialog
box. What should you do?
A. In the Prop.Grade row, change the value of the Type cell to 9.
B. In the Prop.Grade row, change the value of the Type cell to 1, and the formula in the Format cell to
=Prop.Grade.
C. In the Prop.Grade row, change the formula in the Format cell to =LOCK.
D. Insert a new user-defined cell with the formula =
DEPENDSON(Prop.Grade)+SETF(GetRef(Prop.Grade),Prop.Grade).
Answer: B

Microsoft   70-545-Csharp認定資格   70-545-Csharp   70-545-Csharp

Pass4Testは最新の1z0-559試験問題集と高品質のC4060-155認定試験の問題と回答を提供します。Pass4TestのC4120-783 VCEテストエンジンとHP0-J65試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-N40トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/70-545-Csharp.html

070-542-CsharpはMicrosoftの一つ認証試験として、もしMicrosoft認証試験に合格してIT業界にとても人気があってので、ますます多くの人が070-542-Csharp試験に申し込んで、070-542-Csharp試験は簡単ではなくて、時間とエネルギーがかかって用意しなければなりません。

070-542-Csharp認定試験の準備を完了したのですか。試験を目前に控え、自信満々と受験することができますか。もしまだ試験に合格する自信を持っていないなら、ここで最高の試験参考書を推奨します。ただ短時間の勉強で試験に合格できる最新の070-542-Csharp問題集が登場しました。この素晴らしい問題集はPass4Testによって提供されます。

Pass4Testに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。Pass4Testは最新かつ最も正確な試験070-542-Csharp問題集を用意しておきます。Pass4Testは皆さんの成功のために存在しているものですから、Pass4Testを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、Pass4Testはあなたの唯一の選択です。

Pass4Testというサイトには全的な資源とMicrosoftの070-542-Csharpの試験問題があります。それに、Microsoftの070-542-Csharpの試験の実践経験やテストダンプにも含まれています。Pass4Testは受験生たちを助けて試験の準備をして、試験に合格するサイトですから、受験生のトレーニングにいろいろな便利を差し上げます。あなたは一部の試用問題と解答を無料にダウンロードすることができます。Pass4TestのMicrosoftの070-542-Csharpの試験中に絶対な方法で転送することでなく、Pass4Testは真実かつ全面的な試験問題と解答を提供していますから、当社がオンラインするユニークなのMicrosoftの070-542-Csharpの試験トレーニング資料を利用したら、あなたが気楽に試験に合格することができるようになります。Pass4Testは合格率が100パーセントということを保証します。

070-542-Csharp認定試験の準備をするために、Pass4Test の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。Pass4Test のMicrosoftの070-542-Csharp問題集はあなたが楽に試験に受かることを助けます。Pass4Test のMicrosoftの070-542-Csharp練習テストは070-542-Csharp試験問題と解答、 070-542-Csharp 問題集、070-542-Csharp 書籍や070-542-Csharp勉強ガイドに含まれています。

試験番号:070-542-Csharp問題集
試験科目:Microsoft 「MS Office SharePoint Server 2007-Application Development」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2013-12-04
問題と解答:全162問

Pass4TestのMicrosoftの070-542-Csharp試験トレーニング資料はインターネットでの全てのトレーニング資料のリーダーです。Pass4Testはあなたが首尾よく試験に合格することを助けるだけでなく、あなたの知識と技能を向上させることもできます。あなたが自分のキャリアでの異なる条件で自身の利点を発揮することを助けられます。

あなたが悲しいとき、勉強したほうがいいです。勉強があなたに無敵な位置に立たせます。Pass4TestのMicrosoftの070-542-Csharp試験トレーニング資料は同様にあなたに無敵な位置に立たせることができます。このトレーニング資料を手に入れたら、あなたは国際的に認可されたMicrosoftの070-542-Csharp認定試験に合格することができるようになります。そうしたら、金銭と地位を含むあなたの生活は向上させることができます。そのとき、あなたはまだ悲しいですか。いいえ、あなたはきっと非常に誇りに思うでしょう。Pass4Testがそんなに良いトレーニング資料を提供してあげることを感謝すべきです。Pass4Testはあなたが方途を失うときにヘルプを提供します。あなたの独自の品質を向上させるだけでなく、完璧な人生価値を実現することも助けます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/070-542-Csharp.html

NO.1 You implement a custom function as a user-defined function (UDF) in Excel Services in Microsoft Office
SharePoint Server 2007.
A Microsoft Office Excel 2007 workbook uses the custom function to generate a random number between
100 and 500.
You need to generate a new random number each time you load the workbook.
Which code segment should you use?
A. public class MyUdfs
{
Random rand = new Random();
[UdfMethod]
public int GetRandomNumber()
{
return (rand.Next(100, 500));
}
}
B. [UdfClass]
public class MyUdfs
{
Random rand = new Random();
[UdfMethod(IsVolatile=true)]
public int GetRandomNumber()
{
return (rand.Next(100, 500));
}
}
C. [UdfClass]
public class MyUdfs
{
Random rand = new Random();
public int GetRandomNumber()
{
return (rand.Next(100, 500));
}
}
D. public class MyUdfs
{
Random rand = new Random();
public int GetRandomNumber()
{
return (rand.Next(100, 500));
}
}
Answer: B

Microsoft   070-542-Csharp   070-542-Csharp過去問   070-542-Csharp

NO.2 You are creating a Microsoft Office SharePoint Server 2007 Report Center Web site. Your company
stores product data in a Microsoft SQL Server 2005 database named Product Management.
You need to ensure that the product data is available for use in Microsoft Office Excel 2007 reports.
What should you do?
A. Upload a custom Office Data Connection file to the Data Connections library.
B. Upload a custom set of Microsoft SQL Server Reporting Services Report Model files to the Data
Connections library.
C. Create a single sign-on (SSO) provider that manages access to the Product Management database.
D. Create a Business Data Connection for the Product Management database, and define entities in the
Business Data Catalog (BDC) definition.
Answer: A

Microsoft認定資格   070-542-Csharp   070-542-Csharp   070-542-Csharp

NO.3 You create an application for a Microsoft Office SharePoint Server 2007 server.
You create a call center dashboard. You create a Key Performance Indicator (KPI) list that contains KPIs.
You add a KPI Web Part to the dashboard to view KPIs.
You need to permit users to view details that make up each KPI.
What should you do?
A. Add a link to each KPI in the list to take the user to a details page.
B. Add data to a custom SharePoint list and use built-in filter and view capabilities.
C. Add a Filter Web Part to the dashboard page and connect the page to the KPI list Web Part.
D. Filter the items in the KPI list Web Part by the indicator that the user wants to view.
Answer: A

Microsoft   070-542-Csharp   070-542-Csharp認定証   070-542-Csharp認定資格

NO.4 You are designing a Microsoft Office SharePoint Server 2007 solution. A Microsoft SQL Server 2005
Analysis Services cube stores key performance indicators (KPIs).
You need to display details of a KPI in a Web Part.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a KPI List.
B. Add a List Item Web Part.
C. Create a .odc file for the data connection.
D. Create a .udl file for the data connection.
E. Create a Business Data Catalog (BDC) definition.
Answer: AC

Microsoft   070-542-Csharp   070-542-Csharp

NO.5 You create a Microsoft Office SharePoint Server 2007 site.
A document library named CompanyWorkbooks on the site contains Microsoft Office Excel workbooks.
You need to ensure that users can access the workbooks in the CompanyWorkbooks document library by
using Excel Services in Microsoft Office SharePoint Server 2007.
What should you do?
A. Define the site as a managed path within SharePoint.
B. Add the CompanyWorkbooks URL to the trusted location list.
C. Edit the permissions of the CompanyWorkbooks document library to grant full control to the SharePoint
application pool identity account.
D. Create a custom security policy file for the CompanyWorkbooks document library. Add the file to the
securityPolicy section of the Web.config file for the site.
Answer: B

Microsoft   070-542-Csharp認定証   070-542-Csharp   070-542-Csharp認定試験

Pass4Testは最新のC4090-959試験問題集と高品質のCAT-380認定試験の問題と回答を提供します。Pass4TestのVCP510-DT VCEテストエンジンと1Y0-A19試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の648-385トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/070-542-Csharp.html

「今の生活と仕事は我慢できない。他の仕事をやってみたい。」このような考えがありますか。しかし、どのようにより良い仕事を行うことができますか。ITが好きですか。ITを通して自分の実力を証明したいのですか。IT業界に従事したいなら、IT認定試験を受験して認証資格を取得することは必要になります。あなたが今しなければならないのは、広く認識された価値があるIT認定試験を受けることです。そうすれば、新たなキャリアへの扉を開くことができます。Microsoftの070-545-VB認定試験というと、きっとわかっているでしょう。この資格を取得したら、新しい仕事を探す時、あなたが大きなヘルプを得ることができます。何ですか。自信を持っていないから070-545-VB試験を受けるのは無理ですか。それは問題ではないですよ。あなたはPass4Testの070-545-VB問題集を利用することができますから。

Pass4Testは受験者に向かって試験について問題を解決する受験資源を提供するサービスのサイトで、さまざまな受験生によって別のトレーニングコースを提供いたします。受験者はPass4Testを通って順調に試験に合格する人がとても多くなのでPass4TestがIT業界の中で高い名声を得ました。

天帝様は公平ですから、人間としての一人一人は完璧ではないです。私のように、以前が努力しなかったので、今は無駄に悩んでいます。現在のIT領域で競争が激しくなっていることは皆は良く知っていますから、みんなはIT認証を通じて自分の価値を高めたいです。私もそう思いますが、IT認証は私にとって大変難しいです。でも、幸い私はインターネットでPass4TestのMicrosoftの070-545-VB試験トレーニング資料を見つけました。それを手に入れてから私は試験に合格する自信を持つようになります。Pass4TestのMicrosoftの070-545-VB試験トレーニング資料のカバー率がとても高いですから、自分で勉強するよりずっと効率が高いです。あなたもIT業種の一人としたら、ためらわずにPass4TestのMicrosoftの070-545-VB試験トレーニング資料をショッピングカートに入れましょう。Pass4Testはきっとあなたが成功への良いアシスタントになります。

Pass4Testが提供したMicrosoftの070-545-VBの試験トレーニング資料は受験生の皆さんの評判を得たのはもうずっと前のことになります。それはPass4TestのMicrosoftの070-545-VBの試験トレーニング資料は信頼できるもので、確実に受験生を助けて試験に合格するということを証明しました。Pass4Testが提供したMicrosoftの070-545-VBの試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています。Pass4Testは消費者の皆さんの許可を得て、評判が良いです。Microsoftの070-545-VBの認証試験を受けたら、速くPass4Testというサイトをクッリクしてください。あなたがほしいものを得ることができますから、ミスしないだけで後悔しないです。最も専門的な、最も注目を浴びるIT専門家になりたかったら、速くショッピングカートに入れましょう。

試験番号:070-545-VB問題集
試験科目:Microsoft 「TS:Microsoft Visio 2007, Application Development」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2013-12-28
問題と解答:全54問

ずっと自分自身を向上させたいあなたは、070-545-VB認定試験を受験する予定があるのですか。もし受験したいなら、試験の準備をどのようにするつもりですか。もしかして、自分に相応しい試験参考書を見つけたのでしょうか。では、どんな参考書は選べる価値を持っていますか。あなたが選んだのは、Pass4Testの070-545-VB問題集ですか。もしそうだったら、もう試験に合格できないなどのことを心配する必要がないのです。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/070-545-VB.html

NO.1 You have a Windows Forms application that contains an embedded Visio Drawing Control. You have
an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the application to load
and display the drawing as a template by using the Visio Drawing Control. Which code should you add
to the application?
A. Me.axDrawingControl1. Document. Application.Documents.Open( " C:\Template.VSD " )
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked)
Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C

Microsoft過去問   070-545-VB問題集   070-545-VB練習問題

NO.2 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007. The solution
must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs.
Users must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B

Microsoft参考書   070-545-VB   070-545-VB   070-545-VB練習問題   070-545-VB認定証

NO.3 You are developing an Office Visio 2007 Shared Add-in.
You construct an event sink class that listens to events from the Visio 2007 Application, Document, Page,
and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCode As Short,
ByVal source As Object,
ByVal eventId As Integer,
ByVal eventSequenceNumber As Integer,
ByVal subject As Object,
ByVal moreInformation As Object) As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C

Microsoft   070-545-VB過去問   070-545-VB問題集   070-545-VB   070-545-VB認定資格

NO.4 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an
action after the Visio 2007 application flushes its events queue. What should you do?
A. Listen for AppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D

Microsoft練習問題   070-545-VB参考書   070-545-VB認定証

NO.5 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster,
objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage
references the current page. The object objWindow references the active window. You need to create
several shape instances of the master on the current page at specific coordinates in the active window.
Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B

Microsoft過去問   070-545-VB認定証   070-545-VB参考書   070-545-VB

NO.6 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by
using a Dynamic Connector shape. In your application, you create an object named myVisioApp that
references the Visio Application object. You need to add code to your application to connect the 2-D
shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P
age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo
myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2),
visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) ,
visAutoConnectDirRight )
Answer: C

Microsoft   070-545-VB問題集   070-545-VB

NO.7 You create a custom template and several custom stencils. You need the stencils to open
automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C

Microsoft   070-545-VB認定資格   070-545-VB   070-545-VB   070-545-VB認証試験

NO.8 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by
using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B

Microsoft練習問題   070-545-VB   070-545-VB認定試験   070-545-VB認定試験   070-545-VB問題集

NO.9 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that
references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a
different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D

Microsoft練習問題   070-545-VB認定資格   070-545-VB認証試験   070-545-VB   070-545-VB認定証

NO.10 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the
event that there is a fault in the application. What are three possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose three.)
A. Create a VBA solution.
B. Create a VSL solution.
C. Create an EXE add-on solution.
D. Create a Shared Add-in solution, and then use the COM Shim Wizard to create a DLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE

Microsoft   070-545-VB認定試験   070-545-VB   070-545-VB参考書   070-545-VB

Pass4Testは最新の98-372試験問題集と高品質の70-247認定試験の問題と回答を提供します。Pass4TestのCAT-221 VCEテストエンジンとVCP510PSE試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の74-338トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/070-545-VB.html

Pass4Testの070-521-VB問題集はあなたを楽に試験の準備をやらせます。それに、もし最初で試験を受ける場合、試験のソフトウェアのバージョンを使用することができます。これは完全に実際の試験雰囲気とフォーマットをシミュレートするソフトウェアですから。このソフトで、あなたは事前に実際の試験を感じることができます。そうすれば、実際の070-521-VB試験を受けるときに緊張をすることはないです。ですから、心のリラックスした状態で試験に出る問題を対応することができ、あなたの正常なレベルをプレイすることもできます。

Pass4TestのMicrosoftの070-521-VB試験トレーニング資料の知名度が非常に高いことを皆はよく知っています。Pass4Test は世界的によく知られているサイトです。どうしてこのような大きな連鎖反応になりましたか。それはPass4TestのMicrosoftの070-521-VB試験トレーニング資料は適用性が高いもので、本当にみなさんが良い成績を取ることを助けられるからです。

Pass4Testを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。Pass4TestはMicrosoft 070-521-VB認証試験を助けって通じての最良の選択で、100%のMicrosoft 070-521-VB認証試験合格率のはPass4Test最高の保証でございます。君が選んだのはPass4Test、成功を選択したのに等しいです。

試験番号:070-521-VB問題集
試験科目:Microsoft 「UPG:Trans MCPD.NET Frmwk 3.5 Dev Skil to .NET 4 Wndws App De」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2014-01-19
問題と解答:全115問

現状に自己満足して、自分の小さな持ち場を守って少ない給料をもらって解雇されるのを待っている人がいないです。こんな生活はとてもつまらないですから。あなたの人生をよりカラフルにしたいのですか。ここで成功へのショートカットを教えてあげます。即ちMicrosoftの070-521-VB認定試験に受かることです。この認証を持っていたら、あなたは、高レベルのホワイトカラーの生活を送ることができます。実力を持っている人になって、他の人に尊敬されることもできます。Pass4TestはMicrosoftの070-521-VB試験トレーニング資料を提供できます。Pass4Testを利用したら、あなたは美しい夢を実現することができます。さあ、ためらわずにPass4TestのMicrosoftの070-521-VB試験トレーニング資料をショッピングカートに入れましょう。

Pass4Testのトレーニング資料はあなたが試験の準備をしている知識をテストできて、一定の時間にあなたのパフォーマンスを評価することもできますから、あなたの成績と弱点を指示して、弱い点を改善して差し上げます。Pass4TestのMicrosoftの070-521-VB試験トレーニング資料はさまざまなコアロジックのテーマを紹介します。そうしたら知識を習得するだけでなく、色々な技術と科目も理解できます。我々のトレーニング資料は実践の検証に合格したもので、資料の問題集が全面的で、価格が手頃ということを保証します。

恐いMicrosoftの070-521-VB試験をどうやって合格することを心配していますか。心配することはないよ、Pass4TestのMicrosoftの070-521-VB試験トレーニング資料がありますから。この資料を手に入れたら、全てのIT認証試験がたやすくなります。Pass4TestのMicrosoftの070-521-VB試験トレーニング資料はMicrosoftの070-521-VB認定試験のリーダーです。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/070-521-VB.html

NO.1 You are moving a Windows Communication Foundation (WCF) service into production.
You need to be able to monitor the health of the service. You only want to enable all performance counter
instances exposed by the ServiceModelService 4.0.0.0 counter group.
Which element should you add to the system.serviceModel section in the application configuration file?
A. <diagnostics performanceCounters="ServiceOnly" />
B. <diagnostics wmiProviderEnabled="true" performanceCounters="Off" />
C. <diagnostics performanceCounters="All" />
D. <diagnostics wmiProviderEnabled="true" />
Answer: A

Microsoft   070-521-VB   070-521-VB認定証   070-521-VB認定資格   070-521-VB参考書   070-521-VB練習問題

NO.2 You are creating a Windows Communication Foundation (WCF) service based on WSHttpBinding.
New audit requirements dictate that callers must be authenticated on every call to ensure that their
credentials have not been revoked.
You need to ensure that the service will not cache the security request token.
What should you do?
A. Apply a ServiceBehavior attribute to the service implementation class with the InstanceContextMode
property set to Single.
B. In the message security configuration, change clientCredentialType from IssuedToken to UserName.
C. In the message security configuration, set establishSecurityContext to false.
D. At the end of every operation, call the SessionStateUtility.RaiseSessionEnd method.
Answer: C

Microsoft   070-521-VB   070-521-VB

NO.3 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer. You need to expose the following class as a service named
Arithmetic with an operation named Sum.
Public Class Calculator
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
Which code segment should you use?
A. <ServiceContract(Namespace:="Arithmetic")>
Public Class Calculator
<OperationContract(Action:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
B. <ServiceContract(ConfigurationName:="Arithmetic")>
Public Class Calculator
<OperationContract(Action:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
C. <ServiceContract(Name:="Arithmetic")>
Public Class Calculator
<OperationContract(Name:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
D. <ServiceContract(Name:="Arithmetic")>
Public Class Calculator
<OperationContract(ReplyAction:="Sum")>
Public Function Add(ByVal x As Integer,
ByVal y As Integer) As Integer
End Function
End Class
Answer: C

Microsoft   070-521-VB   070-521-VB   070-521-VB問題集   070-521-VB認定資格   070-521-VB認定資格

NO.4 A Windows Communication Foundation (WCF) client uses the following service contract. (Line
numbers are included for reference only.)
01 <ServiceContract()>
02 Public Interface IService
03
04 <OperationContract()>
05 Function Operation1() As String
06 <OperationContract()>
07 Function Operation2() As String
08
09 End Interface
You need to ensure that all calls to Operation1 and Operation2 from the client are encrypted and signed.
What should you do?
A. Set the ProtectionLevel property in line 01 to EncryptAndSign.
B. Set the ProtectionLevel property in line 04 and line 06 to Sign.
C. Add a SecurityCriticalAttribute for each operation.
D. Add a SecuritySafeCriticalAttribute for each operation.
Answer: A

Microsoft認証試験   070-521-VB認定証   070-521-VB   070-521-VB問題集

NO.5 You are consuming a Windows Communication Foundation (WCF) service in an ASP.NET Web
application. The service interface is defined as follows.
<ServiceContract()>
Public Interface ICatalog
<OperationContract()>
<WebGet(UriTemplate:="/Catalog/Items/{id}",
ResponseFormat:=WebMessageFormat.Json)>
Function RetrieveItemDescription(ByVal id As Integer) As String
End Interface
The service is hosted at /Catalog.svc.
You need to call the service using jQuery to retrieve the description of an item as indicated by a variable
named itemId.
Which code segment should you use?
A. $.get(String.format("/Catalog.svc/Catalog/Items/?id={0}", itemId)
null,
function (data) {
},
"javascript");
B. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"json");
C. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"xml");
D. $.get(String.format("/Catalog.svc/Catalog/Items/id={0}", itemId),
null,
function (data) {
},
"json");
Answer: B

Microsoft認証試験   070-521-VB   070-521-VB

NO.6 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(IncludeExceptionDetailInFaults:=True)>
03 Public Class OrderService
04
05 <OperationContract()>
06 Public Sub SubmitOrder(ByVal anOrder As Order)
07
08 Try
09
10 Catch ex As DivideByZeroException
11
12 End Try
13 End Sub
14
15 End Class
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A. Replace line 11 with the following line.
Throw
B. Replace line 11 with the following line.
Throw New FaultException(Of Order)(anOrder, ex.ToString())
C. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw ex
D. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw New FaultException(Of Order)(
anOrder, "Divide by zero exception")
Answer: D

Microsoft   070-521-VB認定証   070-521-VB   070-521-VB   070-521-VB認定証   070-521-VB参考書

NO.7 A Windows Communication Foundation (WCF) service has the following contract.
<ServiceContract(Namespace:="http://contoso.com")>
Public Interface IShipping
<OperationContract()>
Function DoWork(ByVal id As Integer) As String
End Interface
This is one of several service contracts hosted by your application. All endpoints use SOAP 1.2 bindings
with WS-Addressing 1.0. The System.ServiceModel.MessageLogging trace source in the
system.diagnostics configuration section is configured with one listener.
You need to make sure that only the messages that are returned from the DoWork operation are logged.
Which XML segment should you add to the system.serviceModel/diagnostics/messageLogging/filters
configuration element?
A. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
B. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
C. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
D. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
Answer: A

Microsoft過去問   070-521-VB   070-521-VB   070-521-VB   070-521-VB練習問題

NO.8 You are adding a Windows Communication Foundation (WCF) service to an existing application. The
application is configured as follows. (Line numbers are included for reference only.)
01 <configuration>
02 <system.serviceModel>
03 <services>
04 <service name="Contoso.Sales.StockService"
05 behaviorConfiguration="MetadataBehavior">
06 <host>
07 <baseAddresses>
08 <add
baseAddress="http://contoso.com:8080/StockService" />
09 </baseAddresses>
10 </host>
11 </service>
12 </services>
13 <behaviors>
14 <serviceBehaviors>
15 <behavior name="MetadataBehavior">
16 </behavior>

NO.9 You are developing an application to update a user s social status. You need to consume the service
using Windows Communication Foundation (WCF).
The client configuration is as follows.
<system.serviceModel>
<bindings>
<webHttpBinding>
<binding name="SocialConfig">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Basic"
?realm="Social API" />
</security>
</binding>
</webHttpBinding>
</bindings>
<client>
<endpoint address="http://contoso.com"
binding="webHttpBinding"
bindingConfiguration="SocialConfig"
contract="ISocialStatus"
name="SocialClient" />
</client>
</system.serviceModel>
The service contract is defined as follows.
<ServiceContract()>
Public Interface ISocialStatus
<OperationContract()>
<WebInvoke(UriTemplate:="/statuses/update.xml?status={text}")>
Sub UpdateStatus(ByVal text As String)
End Interface
Which code segment should you use to update the social status?
A. Using factory As WebChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)("SocialClient")
factory.Credentials.UserName.UserName = user.Name
factory.Credentials.UserName.Password = user.Password
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
B. Using factory As ChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)(GetType(ISocialStatus))
factory.Credentials.UserName.UserName = user.Name
factory.Credentials.UserName.Password = user.Password
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
C. Using factory As ChannelFactory(Of ISocialStatus) =
New ChannelFactory(Of ISocialStatus)("POST")
factory.Credentials.Windows.ClientCredential.UserName =
user.Name
factory.Credentials.Windows.ClientCredential.SecurePassword.SetAt(
0, user.Password)
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
D. Using factory As WebChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)(GetType(ISocialClient))
factory.Credentials.Windows.ClientCredential.UserName =
user.Name
factory.Credentials.Windows.ClientCredential.SecurePassword.SetAt(
0, user.Password)
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
Answer: A

Microsoft認定試験   070-521-VB問題集   070-521-VB   070-521-VB練習問題   070-521-VB認定資格   070-521-VB認定証

NO.10 You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service.
Which class should you use?
A. ChannelFactory(Of TChannel)
B. ServiceHost
C. ClientRuntime
D. CommunicationObject
Answer: A

Microsoft   070-521-VB問題集   070-521-VB   070-521-VB   070-521-VB練習問題

NO.11 You are creating a Windows Communication Foundation (WCF) service that implements operations in
a RESTful manner. You need to add a delete operation.
You implement the delete method as follows.
Sub DeleteItems(ByVal id As String)
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation.
What should you do?
A. Add the WebInvoke(UriTemplate:="/Items/{id}", Method:="DELETE") attribute to the operation.
B. Add the HttpDelete attribute to the operation.
C. Replace the string parameter with a RemovedActivityAction parameter.
D. Change the Sub statement to Function and specify RemovedActivityAction as the return type.
Answer: A

Microsoft   070-521-VB認定資格   070-521-VB認定証   070-521-VB   070-521-VB   070-521-VB

NO.12 A Windows Communication Foundation (WCF) service is responsible for transmitting XML documents
between systems. The service has the following requirements:
It must minimize the transmission size by attaching the XML document as is without using escape
characters or base64 encoding.
It must interoperate with systems that use SOAP but are not built on the .NET platform.
You need to configure the service to support these requirements.
Which message encoding should you use?
A. Binary message encoding
B. MTOM (Message Transmission Optimization Mechanism) message encoding
C. Text message encoding with message version set to none
D. Text message encoding with message version set to SOAP 1.2
Answer: B

Microsoft   070-521-VB練習問題   070-521-VB認定試験   070-521-VB

NO.13 </serviceBehaviors>

NO.14 You are creating a Windows Communication Foundation (WCF) service to process orders. The data
contract for the order is defined as follows.
<DataContract()>
Public Class Order
<DataMember()>
Public Property CardHolderName As String
<DataMember()>
Public Property CreditCardNumber As String
End Class
You have the following requirements:
Enable the transmission of the contents of Order from the clients to the service.
Ensure that the contents of CreditCardNumber are not sent across the network in clear text.
Ensure that the contents of CreditCardNumber are accessible by the service to process the order.
You need to implement the service to meet these requirements.
What should you do?
A. Add a DataProtectionPermission attribute to the CreditCardNumber property and set the ProtectData
property to True.
B. Convert the DataContract to a MessageContract and set the ProtectionLevel property to
EncryptAndSign.
C. Change the data type of CreditCardNumber from String to SecureString.
D. Implement the CreditCardNumber property getter and setter. In the setter, run the value of the
CreditCardNumber through the MD5CryptoServiceProvider class TransformBlock method.
Answer: B

Microsoft   070-521-VB練習問題   070-521-VB認定試験   070-521-VB   070-521-VB

NO.15 A WCF service code is implemented as follows. (Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(
03 InstanceContextMode:=InstanceContextMode.Single)>
04 Public Class CalculatorService
05
06 <OperationContract()>
07 Public Function Calculate(ByVal op1 As Double,
08 ByVal op As String, ByVal op2 As Double) As Double
24 End Function
25
26 End Class
You need to decrease the response time of the service.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. Change the service behavior to the following.
<ServiceBehavior(
InstanceContextMode:=InstanceContextMode.Single,
ConcurrencyMode:=ConcurrencyMode.Multiple)>
B. Change the service behavior to the following.
<ServiceBehavior(InstanceContextMode:=InstanceContextMode.PerCall)>
C. Require the clients use threads, the Parallel Task Library, or other mechanism to issue service calls in
parallel.
D. Require the clients to use async operations when calling the service.
Answer: AB

Microsoft認定資格   070-521-VB   070-521-VB

NO.16 Your Windows Communication Foundation (WCF) client application uses HTTP to communicate with
the service. You need to enable message logging and include all security information such as tokens and
nonces in logged messages.
What should you do?
A. In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
Generate the ContosoService class using the Add Service Reference wizard.
Add a reference to System.ServiceModel.Routing.dll.
Add the following code segment.
Dim client As ContosoService = New ContosoService()
Dim behavior As SoapProcessingBehavior = New SoapProcessingBehavior()
behavior.ProcessMessages = True
client.Endpoint.Behaviors.Add(behavior)
B. In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"
logEntireMessage="true" />
</diagnostics>
C. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
Generate the ContosoService class using the Add Service Reference wizard.
Add the following code segment.
Dim client As ContosoService = New ContosoService()
client.Endpoint.Behaviors.Add(New CallbackDebugBehavior(True))
D. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"/>
</diagnostics>
Answer: D

Microsoft参考書   070-521-VB過去問   070-521-VB認定資格   070-521-VB   070-521-VB

NO.17 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A. Add the KnownType attribute to the data contract. Set a default value in each of the data member
declarations.
B. Add the KnownType attribute to the data contract. Set the Order property of each data member to
unique integer value.
C. Set the EmitDefaultValue property of each data member to False.
D. Set the IsRequired property of each data member to True.
Answer: D

Microsoft過去問   070-521-VB   070-521-VB   070-521-VB認証試験

NO.18 A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service.
What should you do?
A. On the OperationContractAttribute, set the AsyncPattern property value to True.
B. On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C. On the client, create a proxy derived from DuplexClientBase(Of TChannel).
D. On the client, use GetCallbackChannel(Of T).
Answer: C

Microsoft   070-521-VB   070-521-VB認定証   070-521-VB   070-521-VB認証試験

NO.19 </behaviors>
You need to configure the service to publish the service metadata.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="mexHttpBinding"
contract="IMetadataExchange"
/>
B. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="basicHttpBinding"
contract="IMetadataExchange"
/>
C. Add the following XML segment between lines15 and 16.
<serviceDiscovery>
<announcementEndpoints>
<endpoint address=""/>
</announcementEndpoints>
</serviceDiscovery>
D. Add the following XML segment between lines 15 and 16
<serviceMetadata httpGetEnabled="true"/>
Answer: AD

Microsoft認定資格   070-521-VB認証試験   070-521-VB
17. Four Windows Communication Foundation (WCF) services are hosted in Microsoft Internet
Information Services (IIS). No behavior configuration exists in the web.config file.
You need to configure the application so that every service and endpoint limits the number of concurrent
calls to 50 and the number of concurrent sessions to 25.
Which XML segment should you add to the system.serviceModel configuration section of the web.config
file?
A. <behaviors>
<serviceBehaviors>
<behavior name="*">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
B. <behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
C. <behaviors>
<serviceBehaviors>
<behavior name="">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
D. <behaviors>
<serviceBehaviors>
<behavior name="ALL">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
Answer: C

Microsoft   070-521-VB   070-521-VB   070-521-VB認定試験
18. The endpoint of a Windows Communication Foundation (WCF) service uses basicHttpBinding for its
binding. Your company's policies have changed to require that messages not be sent in clear text.
You must ensure that all messages are encrypted when traveling across the network.
What should you do?
A. Set the ProtectionLevel property on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
B. Set the ProtectionLevel property on the service contract and update the bindingConfiguration attribute
in the endpoint element of the configuration file to webHttpBinding.
C. Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
D. Set the PrincipalPermissionAttribute on the service contract and update the bindingConfiguration
attribute in the endpoint element of the configuration file to wsHttpBinding.
Answer: A

Microsoft   070-521-VB   070-521-VB過去問   070-521-VB   070-521-VB過去問

NO.20 You are developing a Windows Communication Foundation (WCF) service that reads messages from
a public non-transactional MSMQ queue. You need to configure the service to read messages from the
failed-delivery queue. Which URI should you specify in the endpoint configuration settings of the service?
A. net.msmq://localhost/msmq$;FailedMessages
B. net.msmq://localhost/msmq$;DeadLetter
C. net.msmq://localhost/system$;DeadXact
D. net.msmq://localhost/system$;DeadLetter
Answer: D

Microsoft参考書   070-521-VB認定証   070-521-VB認定証   070-521-VB参考書   070-521-VB

Pass4Testは最新の000-587試験問題集と高品質のLOT-958認定試験の問題と回答を提供します。Pass4Testの3103 VCEテストエンジンとC-TSCM62-64試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-275トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.pass4test.jp/070-521-VB.html

↑このページのトップヘ